7-Inch Reliable LCD Display 2012 hyundai veloster screen | LB070WV7-TD01 (Non-Touch)
100% test before shipping | Stable, Reliable and Durable
Factory price and premium quality
If your 2012 hyundai veloster head unit screen is cracked, leaking, showing lines, flickering, or staying black, this LB070WV7-TD01 7-inch LCD (non-touch) is a practical replacement option. Please note: this listing is for the LCD panel only and does not include a touch glass/foil.
Table of Contents
Key Features
Before You Buy (How to confirm compatibility)
What’s in the Box
1. Key Features
7-inch in-dash LCD: designed for factory-style fitment.
Non-touch version: part number LB070WV7(TD)(01) — ideal if you only need to replace the display layer.
Good solution for common failures: stripes/lines, flicker, dim backlight (screen-related), black display, liquid/crystal leak.
Sturdy build: metal backing structure (final look depends on the actual batch).
2. Before You Buy (Important)
This is LCD only (no touch)
This product includes only the LCD panel.
If your system uses touch input, you will typically need to reuse your original touch layer (if it’s still good) or purchase a separate touch component.
How to confirm it’s the right LCD for 2012 hyundai veloster
Remove the screen and check the label on the back.
Confirm the part number: LB070WV7-TD01 / LB070WV7(TD)(01).
Compare connector position and mounting points if possible.
Installation note: If you’re not experienced with trim removal and ribbon cables, it’s safer to have a technician install it to avoid damaging connectors.
3.What’s in the Box (Scope of Delivery)
1 × LB070WV7(TD)(01) LCD panel (non-touch)
| Item | Details |
|---|---|
| Model | LB070WV7 TD01 |
| Part Number | LB070WV7(TD)(01) |
| Screen Size | 7 inch (7.0") |
| Touch | No (non-touch) |
| Placement | In-Dash |
| Type | Car Monitor / LCD Panel |
| Weight | approx. 0.4–0.5 kg (packed weight may vary) |
| Material | Metal structure (depends on actual unit) |
Fits Hyundai (keyword included)
2012 hyundai veloster
2013 hyundai veloster turbo
2014 hyundai veloster
2015 hyundai veloster
Different trims/regions can use different screens. The safest way is to check the sticker on the back of your original LCD.
Also used on some Kia models (verify your original LCD label)
Kia Ceed
Kia Sportage 3
Kia Sorento
✅ Compatibility tip: If your original screen label shows LB070WV7-TD01 or LB070WV7(TD)(01), this is usually the correct match.
Q1: Does this work for 2013 hyundai veloster turbo?
A: In many cases yes, as long as your original LCD part number matches LB070WV7-TD01 / LB070WV7(TD)(01).
Q2: I have a 2014 hyundai veloster and the touch still works, but the display is bad. Can I replace only the LCD?
A: Yes. This listing is designed for LCD-only replacement. If your touch layer is separate and still good, it can often be reused.
Q3: How do I make sure it fits my 2012 hyundai veloster?
A: Check the rear label of your original screen. Matching the part number is the most reliable method.
Q4: If the screen stays black after installation, is the LCD defective?
A: Not always. It can be caused by a loose ribbon cable, backlight power issue, or head unit output problem. Recheck all connections first.
My screen was fading and had lines, but the touch layer was still fine. This LCD-only replacement worked perfectly after install—display is bright and clear again.
I used this on my Kia after verifying the LCD label matched the listing. Fitment was spot on and the screen looks new again.
My old LCD went completely black, but the radio still worked. Replaced the LCD panel and everything came back immediately. If you confirm LB070WV7-TD01 first, it’s a straightforward fix.
Plugged in perfectly once I matched the part number on the back of my original screen. No more black display issues and the picture quality looks OEM.
Install went well, but you need to be careful with the ribbon cable connection—once seated properly, the display is stable and clear. Works exactly as described (LCD only, no touch).